Rockford Fosgate X317-STG2 Stage2 kit Can-Am Maverick X3

Rockford Fosgate X317-STG2 Stage 2 kit Can-Am Maverick X3 models: includes receiver and four speakers
Move your mouse over image or click to enlarge
Product Description
Pay Over Time
Shop More From This Brand : Rockford Fosgate

Great sound for the great outdoors

Can-Am's Maverick X3 is a high-performance side-by-side with plenty of power, and Rockford Fosgate's Stage 2 Maverick X3 kit will definitely add more power to your audio system. With a marine digital media receiver and four powerful marine speakers, this system will add some serious thump to your off-road adventures.

No cuts, no muss, no mods

Rockford Fosgate designed this package to fit right into your Maverick, with no cutting and no modification needed (minimal drilling required). It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your audio gear getting swamped.

A rugged and rockin' receiver

Rockford Fosgate's PMX-1 digital media receiver packs a lot of features into a compact, water-resistant package. This trail-ready stereo features built-in Bluetooth®, so you can stream music stored on your phone, or tune into Pandora® and enjoy your favorite playlists. If you prefer to plug in, you'll find an aux input, plus a USB input that will charge your phone while you're playing music. Speaking of charges, the PMX-1 also has a low-voltage warning alert built-in, so you won't accidentally drain your battery. This kit includes a custom-designed kit that holds the receiver and blends into your Maverick's dash.

Four speakers for awesome sound

The package includes two pairs of 6-1/2" marine speakers, two for the front and two loaded into cage-mountable enclosures. The durable poly cones withstand moisture and sunlight, as do the 1/2" dome tweeters in the grilles. They're really easy to install, too, thanks to the made-for-the-Maverick X3 speaker enclosures included in this kit. These rugged enclosures bolt right in using the factory mounting holes with just a little bit of drilling.

Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.

iPod®/smartphone note: If you're going to use your iPod or smartphone with this receiver, be sure to check "Details" for compatibility information.

Product highlights:

  • system includes marine digital media receiver, four speakers, dash kit, speaker enclosures, and wiring
  • comes with all necessary mounting and installation hardware
Rockford Fosgate PMX-1 marine digital media receiver (does not play CDs)
  • built-in amplifier (25 watts RMS/50 peak x 4 channels)
  • built-in Bluetooth for music streaming (will not make calls)
  • works with Apple and Android smartphones
  • USB port and aux input
  • rugged Element Ready design
  • 2.3" dot matrix display
  • global AM/FM/Weather tuner (antenna not included)
  • warranty: 2 years
Rockford Fosgate M0-65B 6-1/2" 2-way marine speakers (two pairs)
  • power handling up to 65 watts RMS (250 watts peak)
  • two front speakers mounted in custom enclosures
  • two rear speakers mounted in cage-mountable enclosures
  • UV-stable Centrex® injection-molded plastic parts
  • 1/2" dome tweeters
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # X317-STG2

What's in the box:

  • This Rockford Fosgate package contains 6 individually boxed items:
  • PMX-1 Media Receiver:
  • Marine digital media receiver
  • Trim-ring
  • Mounting plate
  • Mounting bracket
  • Wiring harness
  • 4 Machine screws
  • 4 Hex-nuts
  • Operation Manual
  • M0-65B 6.5" Marine Speakers:
  • Two 2-way marine speakers
  • Twelve 1-1/4" Stainless steel Allen head screws
  • Two 3mm Allen head bits
  • 3.5mm Drill bit
  • Instruction manual (English/ French/ Spanish/ German/ Italian)
  • Rockford Fosgate contact information
  • M0WL-65MB 6.5" Moto-Can Speakers:
  • Two M0 6.5" Moto-Can speakers w/installed sport grille
  • 2 Upper mounting brackets
  • 2 Lower mounting brackets
  • Four 1.0" - 1.6" rubber shims w/mounting hardware (four 1-3/8" bolts / 4 flat washers / 4 lock washers)
  • Four 1.6" - 2.0" rubber shims w/mounting hardware (four 1-3/4" bolts / 4 flat washers / 4 lock washers)
  • Two 12" 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
  • 2 Connection cover-plates
  • 4 Plastic grommets
  • 1/8" Hex bit
  • T-45 Torx wrench
  • Instruction manual
  • Contact information card
  • X317-DK Dash Kit:
  • Radio housing
  • Trim ring
  • Rear support plate
  • 35" Speaker harness
  • 6' Wire antenna (Motorola plug on one end / bare-ended wire on other end)
  • Two 24mm screws
  • Eight 1/2" screws
  • Twelve 8" wire-ties
  • Contact information card
  • X317-FSE Speaker Enclosures:
  • 2 Unloaded speaker enclosures
  • 35" Left front speaker harness
  • 52" Right front speaker harness
  • Five 8" wire ties
  • One 30mm bolt
  • 1 Flat washer
  • 1 Nut
  • 2 Warning decals
  • Contact information
  • MX-RSW16 Rear Speaker Harnesses:
  • Two 17.5' Rear speaker harnesses
  • Six 6" wire-ties w/ push-fastener ends
  • Sixteen 7.5" wire-ties
  • Contact information card
Make Model Year Can-Am Maverick X3 Turbo 2017-2021 Maverick X3 Turbo R 2017-2021 Maverick X3 DS Turbo 2018-2021 Maverick X3 DS Turbo R 2018-2021 Maverick X3 X DS Turbo 2017-2020 Maverick X3 X DS Turbo RR 2018-2021 Maverick X3 RS Turbo R 2017-2021 Maverick X3 X RS Turbo 2017-2020 Maverick X3 X RS Turbo RR 2017-2021 Maverick X3 X MR Turbo² 2018-2021 Maverick X3 MR Turbo RR² 2018-2021 Maverick X3 X RC Turbo 2018-2021 Maverick X3 X RC Turbo RR¹ 2018-2021 Maverick X3 MAX Turbo 2017-2020 Maverick X3 MAX Turbo R 2017-2020 Maverick X3 MAX DS Turbo 2018-2021 Maverick X3 MAX DS Turbo R 2017-2021 Maverick X3 MAX DS Turbo RR 2018-2021 Maverick X3 MAX RS Turbo R 2017-2021 Maverick X3 MAX X RS Turbo RR 2018-2021 Maverick X3 MAX X MR Turbo RR² 2018-2021

Media Receiver & Dash Kit
M0-65B Front Speakers & Enclosures
M0WL-65B Rear Speakers & Wiring


Vehicle Compatibility: The Rockford Fosgate X317-STG2 can be used with the following Can-Am Maverick vehicles:

Make Model Year
Can-Am Maverick X3 Turbo 2017-2021
Maverick X3 Turbo R 2017-2021
Maverick X3 DS Turbo 2018-2021
Maverick X3 DS Turbo R 2018-2021
Maverick X3 X DS Turbo 2017-2020
Maverick X3 X DS Turbo RR 2018-2021
Maverick X3 RS Turbo R 2017-2021
Maverick X3 X RS Turbo 2017-2020
Maverick X3 X RS Turbo RR 2017-2021
Maverick X3 X MR Turbo² 2018-2021
Maverick X3 MR Turbo RR² 2018-2021
Maverick X3 X RC Turbo 2018-2021
Maverick X3 X RC Turbo RR¹ 2018-2021
Maverick X3 MAX Turbo 2017-2020
Maverick X3 MAX Turbo R 2017-2020
Maverick X3 MAX DS Turbo 2018-2021
Maverick X3 MAX DS Turbo R 2017-2021
Maverick X3 MAX DS Turbo RR 2018-2021
Maverick X3 MAX RS Turbo R 2017-2021
Maverick X3 MAX X RS Turbo RR 2018-2021
Maverick X3 MAX X MR Turbo RR² 2018-2021

¹Front speakers require removal and reinstallation of Intrusion Bar.
²Snorkel obstruction (if applicable) prevents rear speakers from being mounted inside the roll-cage. If mounting on the outside, use caution as the speakers can be damaged by trees and other trail obstacles.

Media Receiver & Dash Kit

Marine Certified: Rockford Fosgate's PMX series of source units are fully tested against UV radiation degradation as well as tested to IPX water intrusion standards. They are also fully tested for ever changing environmental conditions such as temperature extremes, as well as vibration testing to make sure they can take a bump and keep performing. The PMX-1 is protected against Dust, UV, Temperature, Water, Corrosion & Vibration.

  • Dust: The unit's display and motor structure are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
  • UV Inhibitor Materials: Centrex and ASA plastic materials are used for UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
  • Thermal Shock Tested: Tested for extreme temperature operation as well as severe fluctuations in ambient temperature. Components are taken to both low and high temperature extremes and then tested to ensure operational capabilities.
  • Water Tested: IPX5 and IPX6 Ratings allow for the components to be directly sprayed with water without water incursion.
  • Corrosion Protection: Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
  • Vibration: Subjected to full vibration and shock testing to ensure that it will take abuse and keep performing to our stringent standards.

Applications: The PMX-1 digital media receiver is designed for marine and motorsports systems.

Optically Bonded LCD: The Rockford Fosgate PMX-1 features a 2.3" LCD screen (with white background and black text) for optimum viewing, even in full sun. The LCD screen is optically bonded to prevent any dust or moisture penetration. There are two brightness settings for the LCD screen.

Water Resistant Control Knob: The PMX-1 uses a water resistant rotary encoder knob, along with push-button controls that feature white LED illumination.

Voltage Gauge & Warning: You can check the voltage of your system through the PMX-1's menu. The unit also provides a Low Voltage Warning Alert.

EEPROM (Electrically Erasable Programmable Read-Only Memory): The Rockford Fosgate PMX-1 features an EEPROM memory system which retains settings (including Audio & Bluetooth settings) even when power is removed.

Bluetooth Music Streaming: The Rockford Fosgate PMX-1 offers built-in Bluetooth (version 3.0+EDR) for wireless music playback from your Bluetooth-enabled Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows phone, Blackberry, and more. You are able to stream stored music and music apps from your Bluetooth device to the PMX-1 marine receiver. You can control basic playback functions like Play/Pause, Previous Next/Track and Repeat/Shuffle for stored music and music apps on your device. When using a Bluetooth AVRCP 1.4 compatible device like the Apple iPhone (iOS 5.0+) or an Android smartphone (OS 4.0+), you can even browse your stored music by category (Playlist/Artist/Song/Genre). The PMX-1 will also display your device's song/artist information with album art.

Note: This unit does not support Bluetooth hands-free communication for phone calls.

USB Port: The Rockford Fosgate features a rear-panel USB (type-A) port for connection of a USB mass storage class device, like a USB thumbdrive or flashdrive. The unit supports playback of MP3 and WMA music files loaded onto a USB MSC device (up to 32GB). It can recognize up to 255 folders and 999 files. You are able to browse your music by folders, as well as control basic playback functions like Play/Pause, Previous/Next Track and Repeat/Random. The USB port (1A) will aso charge a connected USB-enabled electronic device.

Note: The unit's USB port is not compatible with Apple iOS and Android devices.

Aux Input: The Rockford Fosgate PMX-1 is fitted with a rear-panel stereo RCA AUX input to connect an external audio source. You can give the Aux input a custom  name.

AM/FM Tuner: The PMX-1 features a built-in AM/FM tuner with manual, seek, and preset tuning. You can store up to 18 FM and 12 AM preset stations; these presets can be stored manually or automatically. You can set the tuner to Local or Distance tuning. The Local option tunes to nearby radio stations with sufficiently strong signals for good reception. In areas where reception is poor, switching to Distance tuning enables the unit to tune in to more distant stations. You can choose between US or European tuning.

Weather Band: The Rockford Fosgate PMX-1 is also equipped with a built-in weather band tuner. Select from weather band frequencies between 162.40 to 162.55.

MOSFET Amplifier: The PMX-1 is equipped with a MOSFET amplifier. Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers increased power with less distortion and absolutely zero on/off switching noise. More power means louder and cleaner music at higher volumes because you're not pushing the limits of the amplification circuit.

  • Full Bandwidth Power: 25 watts RMS x 4 channels (at 4 ohms, 20-20kHz, 1% THD)
  • Maximum Output Power: 50 watts x 4 channels (200 watts total)
Note: The power specifications for the marine receiver are compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement standards from the Consumer Electronics Association (CEA). These standards were developed as a way to equitably compare power specs from model to model and between manufacturers.

4V/4Ch Preouts: The Rockford Fosgate PMX-1 is equipped with two pair of 4-volt preamp outputs (Front & Rear/Sub). You can configure the Rear/Sub pre-out for rear speakers with fading capability or as a non-fading sub output. You can turn off the unit's internal amplifier, you plan on using only external amps.

Equalizer: The PMX-1 is equipped with a variety of EQ presets, and 7-Band EQ, and Rockford Fosgate's Punch EQ.

  • Presets: Select between seven EQ presets - FLAT, ROCK, CLASSIC, ACOUSTIC, DANCE, ELECTRONIC, or HIP-HOP.
  • 7-Band EQ: Use the built-in 7-band EQ to custom tailor the sound of your music to your liking.
  • Punch EQ: Punch EQ is an onboard equalizer with up to +18dB at 45Hz and/or up to +12dB boost at 12.5kHz.

High-Pass & Low-Pass Crossovers: The PMX-1 provides a high-pass crossover for the front & rear channels which can be set to 60Hz, 80Hz, 120Hz, or Full-Range. The unit also provides a low-pass crossover for the subwoofer output that can be set to 60Hz, 80Hz, 120Hz, or Full-Range.

Sub Control: When the sub out is activated, you can independently adjust its volume level from 0 to 20.

Source Gain: You can adjust the gain of each source so they all play at the same volume level. Select between -3dB, -2dB, -1dB, 0dB, +1dB, +2dB, or +3dB for each source.

Key Beep: A beep tone will sound with any press of a button on the receiver. This can be turned on or off.

Dimensions: The receiver has the following dimensions:

  • Chassis:
    • Diameter: 2.975"
    • Depth: 4.675"
  • Nose:
    • Width: 4.335"
    • Height: 3.955"
    • Depth: 1.25"
  • Trim Ring:
    • Width: 4.495"
    • Height: 4.125"
    • Depth: 0.675"

Screw Hole Pattern: The faceplate has two mounting holes across the top of the face-plate, and two holes on the bottom of the faceplate for securing the unit to the bulkhead. The included trim-ring covers the screws holes for a neat installation. The screw hole spacing is as follows.

  • Width (Top & Bottom): 4.015"
  • Height (Between Top and Bottom Row): 3.465"
  • Screw Mounting Depth: 1.0"

Receiver Dash Kit: The Rockford Fosgate X317-DK dash kit is designed to facilitate the installation of the Rockford Fosgate PMX-1 digital marine source unit. The dash kit includes a main dash housing, an outer trim ring, speaker output wiring, and mounting hardware.

M0-65B Front Speakers & Enclosures

Marine Tested: Rockford Fosgate uses industry standard tests (ASTM B117 salt/fog and ASTM G154 UV) to ensure the M0-65B speakers are durable in the difficult marine environment.

Tweeters: The ½" balanced dome tweeters are made of LCP (liquid crystal polymer), a high strength/light weight material. The tweeters are bridge mounted to the grille, useful in a marine speaker because no opening through the middle of the woofer for the mounting post is needed.

ICC Crossover: The ICC (Integrated Concealed Crossover) simplifies installation and protects the crossover by concealing it inside the basket, creating a cleaner look and easier installation. The crossover has a 6 dB/octave slope.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.

Stainless Steel: The mounting hardware is stainless steel to resist corrosion.

Front Speaker Enclosures: The RFX317-FSE front speaker enclosures feature an injection-molded design that offers seamless construction, and are texture and color matched to the vehicle's interior. The enclosures have been designed to accommodate the included Rockford Fosgate M0-65B 6-1/2" speakers and include multiple pre-drilled speaker mounting holes.

Mounting: The RFX317-FSE speaker brackets get mounted into the front driver and passenger side dash areas using the OEM mounting holes, with minimal drilling required for installation.

Wiring: The RFX317-FSE includes 2 pre-loomed speaker wire harness designed to plug directly into the included Rockford Fosgate Marine/Powersports headunit. The other end of the speaker wire is terminated in female slip-on terminals for attaching to the speakers.

M0WL-65MB Rear Speakers & Wiring

Moto-Can Speakers: The Rockford Fosgate M0WL-65MB Moto-Can speakers each feature a 6.5" 2-way speaker mounted in a sealed enclosure. Built for off-road use, both the speakers and enclosures are part of Rockford Fosgate's "Element Ready" products, designed to stand up to water, dirt, mud, and UV rays.

Two-Way Design: The Rockford Fosgate M0WL-65MB Moto-Can speakers come loaded with an M0-65 Series 6.5" 2-way marine speaker, designed to provide superb low and midrange frequencies with a smooth high-frequency roll-off. Both the tweeter and woofer have been treated for UV radiation and salt-fog resistance for maximum outdoor lifespan.

  • 0.5" Tweeter: The M0WL-65MB features a 0.5" dome tweeter for crisp, clear highs. The tweeter is coaxially mounted to the 6.5" woofer.

  • 6.5" Woofer: The woofer is made of a mineral filled, injection molded polypropylene material and features integrated UV inhibitors protecting it from sun exposure. This is attached to the UV stable injection molded frame assembly by a VAST vertically attached surround, designed to increase the cone's effective radiating area by up to 25%.

  • Integrated Crossover: The M0WL-65MB features an integrated 6dB/octave crossover network.

  • Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.

Power: Each Rockford Fosgate speaker can handle up to 65W RMS (250W peak).

Rugged Enclosure: The enclosures are constructed of high density ASA material and coated with a UV inhibitor to withstand the harsh outdoor environment.

IPX6: The M0WL-65MB speakers carry an IPX6 waterproof rating, making them impervious to water spray from all directions.

Mounting: The Rockford Fosgate M0WL-65MB speakers are designed to be mounted to SXS ROPS (Roll Over Protection System) tubing ranging from 1.0" - 2.0" in diameter. Stainless steel mounting clamps are included that provide up to 360° of rotation for optimal speaker aiming, and include rubber shims for a secure fit.

Grilles: Each speaker includes a UV stable, ASA plastic Sport grille (black).

Wiring: Wire connections to the M0WL-65MB speakers are made through the two provided 12" 6-pin wire harnesses (only 2 pins are used) with Deutsch marine-grade connectors. Both wire harnesses feature integrated rubber seals that prevent water and dirt ingress when the connector is attached to the speaker.

MX-RSW16 Rear Speaker Harnesses: The MX-RSW16 kit includes two pre-configured 17.5' wire harnesses for use with the rear Moto-Can speakers. Each harness is terminated with Deutsch marine-grade connectors that are designed for "plug-and-play" installation. The MX-RSW16 wire harnesses are Element Ready to withstand even the harshest outdoor environments.

Customer Reviews

Be the first to write a review

We'll Find It For You.

Are you having trouble finding this product in the color, size or other option you're looking for? 

Use our SPECIAL ORDER FORM and we will do our best to make sure you find what you're looking for. 


Snyder PowerSports is not affiliated with Polaris Industries, Kawasaki, Can-Am (Bombardier), Honda, John Deere, Arctic Cat or Yamaha in any way. Nor are we affiliated with any other ATV or UTV manufacturer that may be listed in product titles and/or descriptions. References within this web site to the specified brands and their atv and/or utv model names is for the convenience of the public and does not constitute endorsement or recommendation by Snyder Powersports.

Snyder Powersports offers parts and accessories directly from the manufacturers and from our distributors. 

Snyder Powersports is not responsible for any problems, issues or damages as a result from aftermarket accessories, parts, wheels, tires and other/all products purchased from Snyder Powersports and installed on your/other's vehicles. 

FREE UPS Ground Shipping Promotion on Orders Over $99

• Free UPS ground shipping promotion is valid only on orders shipped to the lower 48 contiguous continental United States.
• Order total of $99.00 for Ground Shipping must be reached with product purchases only and will not include shipping, overweight charges or other miscellaneous fees. Free shipping order value is calculated on the total amount of your order excluding overweight packages. Over-sized packages and special shipping fees are not waived with this offer. Charges are subject to change. Confirm your shipping charge and method at time of order. 
• Offer does not apply to orders shipping to Hawaii, Alaska, Puerto Rico, Canada, APO/FPO, Postal Office Box or any international orders.

Exceptions to FREE Shipping Promotion

• Orders containing items such as wheels, rims, tires, ATV plastic, or other large oversize packages will be charged applicable UPS ground shipping rates.
• Offer does not apply to orders shipping to Hawaii, Alaska, Puerto Rico, Canada,  APO/FPO, Postal Office Box or any international orders.
• Hazardous chemicals, aerosols and batteries must be sent ground due to shipping carrier regulations. Regular shipping charges will apply.
• Orders are held to ship complete.


No International Shipping

You may return most new, unopened items for a full refund within 30 days of delivery. These items should be in their original packaging and have their serial number or UPC. Special order returns are at our discretion on a case by case basis. If you would like to make a return or exchange, you must contact us by phone or email and submit an RMA (Return Merchandise Authorization) number before returning your items. This RMA number is usually written on the bill of lading (issued by the mail carrier's shipping department) or somewhere on the packaging. If you cannot find your RMA, one may be obtained by contacting us by phone or email.

All returns will be subject to a 15% restocking fee. Remember, if you would like to return or exchange your item, you must contact us before sending it back. Items returned to us without notification will not be eligible for a refund or exchange.

Returns will not be accepted on items that are:
  • Opened or used
  • Missing their serial number or UPC
  • Special orders (returned at our discretion)
  • Returned more then 30 days after delivery
  • Returned without notification