• This Ride Command system contains 11 individually boxed items along with Rockford Fosgate Ride Command tuning information:
• M5-1500X5 Amplifier:
• 5-Channel powersports amplifier
• 11" Power/ground/turn-on & subwoofer output harness (installed on amp)
• 11" Input harness (installed on amp)
• Three 14" RCA-to-Molex input adapters
• Power/ground/turn-on adapter plug
• Subwoofer output adapter plug
• Two 7.5" speaker output harnesses
• 3mm Allen key
• Owner's manual
• Performance certificate
• Contact information
• M2-65B Speakers (x2):
• Two 6.5" 2-way marine speakers
• 2 Centrex plastic grilles (Black)
• 2 Stainless steel grilles
• 2 Grille rings (Black)
• Two 11" LED power harnesses with 4-pin Deutsch connectors on one end
• Twelve 1-3/4" Stainless steel Allen head screws
• 3mm Allen head bit
• 3.5mm Drill bit
• Instruction manual (English/ French/ Spanish/ German/ Italian)
• M2D4-10IB Subwoofer:
• One 10" marine subwoofer
• 1 Centrex plastic grille (black)
• 1 Stainless steel grille
• 1 Grille ring (black)
• One 11" LED power harness with 4-pin Deutsch connector on one end
• Six 2-3/8" Stainless steel Allen head screws
• 4mm Allen head bit
• 4.5mm Drill bit
• Instruction manual (English/ French/ Spanish/ German/ Italian)
• PMX-RGB Color Optix Light Controller:
• LED Controller w/ attached 17" LED cables and 17" power/ground harness (inline 2A ATC fuse)
• 6" Power/ground harness adapter
• Two 3/4" machine-screws
• 2 Nuts
• 2 Lock-washers
• Installation manual
• RFPOL-RC5:
• Polaris Ride Command interface (attached 12" input and 5" output harnesses)
• Instructions
• RNGR18-FSE:
• 2 Unloaded speaker pods with attached 57" wire harness
• Four 1-1/2" mounting screws
• Five 8" wire-ties
• Rockford Fosgate contact information
• RNGR18-RSE:
• 2 Unloaded rear speaker enclosures (each with top and bottom section)
• 22' Rear speaker wire harness
• Eight 8" wire-ties
• Four 8" wire-ties with clips
• Four 6" wire-ties with push-fasteners
• Fourteen 1" screws
• 2 Spacers (for 2-seat version)
• Rockford Fosgate contact information
• RNGR18-FWE:
• Unloaded subwoofer enclosure with attached 24" internal speaker harness
• Mounting plate
• Rubber port cap
• 15.5' Subwoofer wire harness
• One 15" wire-tie
• Nine 8" wire-ties
• One wire clamp
• Three 1-1/2" hex-socket screws
• Two 1" bolts
• One 1/2" screw
• 2 Flat-washers
• 2 Lock-washers
• Rockford Fosgate contact information
• RNGR18-K4 Amplifier Mounting & Wiring Kit:
• Amplifier mounting bracket
• 12' Power/ground/speaker harness (4 AWG with inline fuse-holder and 100A Maxi fuse installed)
• 3' Front/Rear RCA to Molex harness
• Nine 8" wire-ties
• Three 6" wire-ties with push-fasteners
• Four 3/8" screws
• Rockford Fosgate contact information
• RNGR18-Tool Kit:
• Three 2" rubber grommets
• Drill bit with 1-3/4" hole-saw

Compatibility
M5-1500X5 Amplifier
M2-65B Speakers & Enclosures
M2D4-10IB Subwoofer & Enclosure
PMX-RGB LED Controller

Compatibility

Compatible Models: The Ranger Stage-6 Audio System for Gen-2 Ride Command (RNGR18-STG6) is designed specifically to be installed in the following Polaris Ranger vehicles that feature a factory Polaris Ranger Poly Roof (must be present for rear speaker installation). The RNGR18-STG6 system is compatible with the Polaris Ranger Premium Roof Liner.

• Full-Size (3-Seat):

• Crew (6-Seat):

Note: The Rockford Fosgate Ranger Stage-2 audio system is not compatible with Polaris Ranger: Mid-Size (2-Seat) models, Crew (4-Seat) models, Youth 150 EFI models, Crew 570-6, Crew 570 Full-Size, Crew Diesel, Crew 1000, Crew 1000 EPS, Crew 1000 Premium, Crew 1000 Premium + Winter Prep Package, Crew XP 900 EPS, Crew XP 900, 570 Full-Size, Ranger Diesel, Ranger 1000, 1000 EPS, 1000 Premium, 1000 Premium + Winter Prep Package, XP 900, and XP 900 EPS models.

RFPOL-RC5: The included RFPOL-RC5 interface allows you to upgrade the sound system while keeping the Ride Command headunit. The interface features pre-attached Molex harnesses that simply plug in-line with the output of the Ride Command, allowing the output signal to be fed to the included 5-channel amplifier and speakers. Other features include:

• Noise Elimination: The RFPOL-RC5 features circuitry that's been engineered to eliminate the turn-on pop common with all Ride Command units. It also helps eliminate noise in UTVs equipped with Dynamix suspension systems caused by switching between Firm, Sport, and Comfort ride modes.
• Crossover: The audio interface utilizes the built-in crossovers in the Ride Command, which include a 100Hz HP filter for the 4 main speakers, and a 100Hz LP filter for the subwoofer.
• Headunits: The RFPOL-RC5 interface is compatible with both 5-button and 7-button Ride Command headunits.

M5-1500X5 Amplifier

Overview: The Rockford Fosgate M5-1500X5 is a 5-channel powersports amplifier with a rated power output of 100 watts per channel at 4-ohms or 2-ohms for the four main channels, and 400 watts @4O/600 watts @2O for the subwoofer channel. This Element Ready amplifier can be used on motorcycles, ATVs, UTVs, or boats, and can withstand harsh environmental conditions.

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4O load with 1% or less Total Harmonic Distortion plus noise (THD+N). CEA-2006 allows consumers to compare amplifiers and receivers under identical conditions. The CEA-2006-rated RMS power output is 100 watts RMS x 4 channels. Additionally the power output is 100 watts RMS x 4 channels into 2O and 200 watts RMS x 2 channels bridged (into 4O). The subwoofer output is rated for 400W x 1 @4O, 600W x 1 @2O, and 600W x 1 @1O.

Element Ready: Rockford Fosgate's Element Ready Amplifiers are protected against dust, UV rays, and corrosion. Marine-grade, two-part epoxy-coated circuit boards are used to prevent corrosion due to exposure in moist and humid places. In addition, stainless hardware is used to help prevent rust and corrosion of all electrical connections. The M5-1500X5 carries an IPX6 rating, making it impervious to water spray.

Amp Class: The M5-1500X5 features Rockford Fosgate's proprietary Class-AD technology for the front & rear speaker channels and Class-BD for the subwoofer channel. This allows the amplifier to produce more power with less current draw from the vehicle's charging system.

MEHSA 4 Cooling: The amplifier features Rockford Fosgate's MEHSA 4 (Maximum Efficiency Heat Sink Application) technology that reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output circuitry's life span.

DSM (Discrete Surface Mount): High speed robotics are used in the manufacturing process to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

CLEAN Set-Up: Rockford's integrated level setting technology, CLEAN (Calibrated Level Eliminates Audible Noise), replaces sophisticated test equipment with input/output clip LEDs, allowing you to match the source unit's output to the amp's gain, and optimize the amp's output. The input clip indicator works in conjunction with the audio source volume, illuminating red when the source reaches its clipping point. The output clip indicator works in conjunction with the input level dial on the amp, illuminating the appropriate color depending on the audio content used for the setup.

PRESET: The M5-1500X5 features Rockford Fosgate's PRESET setting (On/Off) that eliminates the need to set-up the amplifier when used with a compatible Rockford Fosgate ATV/UTV Stage 3 or Stage 4 audio kit (sold separately). When set to On, the PRESET circuitry automatically optimizes the front, rear, and subwoofer input levels, Punch EQ, and crossover settings. If manually setting these adjustments, the PRESET switch should be set to the Off position. Individual PRESET switches are provided for the front, rear, and subwoofer outputs.

Input Level: The amplifier has dual input level controls for the front and rear channels, conveniently accessible from the top. To accommodate the varying range of signal levels from today's factory and aftermarket radios, the input levels are adjustable from 150mV to 12V. A small flat-head screwdriver (not supplied) is needed to adjust the levels.

Crossover: The amplifier has three built-in crossovers for the front, rear, and subwoofer channels. All three crossovers are variable from 50Hz to 250Hz with a slope of 12dB/octave. The front and rear channels can be independently set to high-pass, all-pass (full range), or low-pass operation, while the subwoofer channel is set for low-pass operation. The rotary frequency settings can be adjusted with a small screwdriver.

Punch EQ: The amplifier has two Punch EQ functions (for front and rear) that change with the crossover switches. When the crossover is set to low-pass, the Punch EQ acts as a variable bass boost; 0 to +18dB at 45Hz. When the crossover is set to high-pass, the Punch EQ acts as a variable treble boost, 0 to +14dB at 12.5kHz. When the crossover is set to all-pass, both the bass and treble boost circuits are active. The subwoofer channel's Punch EQ acts as a variable bass boost only.

Power Connections: The M5-1500X5's power, ground, and remote turn-on terminals are located on a single 11" harness with matching adapter. The adapter accepts up to 4 AWG wire (recommended) and features set-screws for locking the wire in place. The power/ground harness is combined with the subwoofer output harness and attached to the amp in one large connector that's held in place with 2 hex-socket screws.

Fuse: The amplifier does not have an on-board fuse. A 200-amp fuse should be placed on the power wire within 18" of the battery.

Speaker Connections: The amplifier is equipped with two 11" speaker output harnesses which are combined with the power/ground harness to one connector at the amplifier. Two 7.5" speaker harnesses plug into the output harnesses and provide bare-ended wire connections. Front and rear speaker outputs can be bridged to provide two 2 x 200W @4O outputs. The subwoofer output cannot be bridged. Pre-configured harnesses are provided in the RNGR18-STG6 kit that will connect directly into the amplifier and the factory wiring, without the need for cutting or splicing.

Signal Input: The amplifier's Differential Inputs will accept either a line-level or speaker-level input on the Molex-style connectors. A single amp connector, secured with hex-socket screws to the amp, features three 4-pin Molex connectors on the other end for connecting the included input adapter harnesses. Each input adapter harness has a 4-pin Molex plug on one end and dual RCAs on the other end. Front and rear line-level signals can simply be connected via RCA cables from the source unit to each input harness. For a speaker-level signal, you can cut the RCA connectors from the input harnesses and splice the wires to the speaker wires of the source unit. When using a speaker-level input signal, the auto turn-on feature is active and the remote turn-on terminal becomes a 12 volt output, which can be used to turn on/off an additional amplifier or other component.

RNGR18-K4 Amp Mounting & Wiring Kit: The included RNGR18-K4 amplifier mounting bracket has been designed specifically for mounting a single M5 Series Element Ready amplifier (included) in the front of the vehicle under the hood. The mounting bracket features pre-drilled and tapped mounting holes for the amplifier and mounting tabs that line up to factory bolts. The kit also includes pre-cut and loomed 4 AWG power and ground wires along with signal input and speaker output leads that are designed to plug directly into the M5-1500X5 amplifier and into the factory wiring.

Note: The included wire harnesses are pre-fitted with Molex plugs to directly fit a Rockford Fosgate M5-1500X5 4-channel amplifier. Installation of any other amplifier will require modifications to the wire harnesses.

M2-65B Speakers & Enclosures

Speaker Overview: The Rockford Fosgate RNGR18-STG6 kit includes two pairs of M2-65B 2-way marine speakers along with custom enclosures for mounting in the front and rear of your compatible Polaris Ranger. The enclosures are constructed of reinforced polymer along with a UV resistant finish, and are roto-molded for a seamless speaker mount that's both lightweight and durable. The speaker enclosures are also color and texture matched to the vehicle's interior and are a direct bolt-in using the OEM mounting holes. Pre-attached wiring harnesses in each enclosure provide a direct plug-in to the factory wiring and to each speaker.

Marine Tested: Rockford Fosgate uses industry standard tests (ASTM B117 salt/fog and ASTM G154 UV) to ensure the M2-65B speakers are durable in the difficult marine environment.

Woofers: The woofer cones are injection molded, mineral filled polypropylene with UV inhibitors. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.

Surrounds: The TPE surrounds (Thermo-Plastic Elastomer, a synthetic rubber) are UV and salt/fog resistant.

Tweeters: The 1" dome tweeters are bridge mounted, useful in a marine speaker because no opening through the middle of the woofer for the mounting post is needed.

Color Optix: The M2-65B marine speakers feature Rockford Fosgate's Color Optix RGB LED lighting integrated into the back of the tweeter casing, creating a glow on the woofer cone. Control of the RGB LED lighting is done using the included Rockford Fosgate PMX-RGB Color Optix controller in conjunction with the free RF Connect App on your smartphone or tablet. This lets you select from a wide range of colors along with adjusting brightness and scrolling speed.

Speaker Terminals: In addition to standard male quick slide terminals, each speaker also has 2-pin waterproof Deutsch terminals. Speaker wire harnesses with 2-pin waterproof Deutsch DT Series connectors are not included.

ICC Crossover: The ICC (Integrated Concealed Crossover) simplifies installation and protects the crossover by concealing it inside the basket, creating a cleaner look and easier installation. The crossover is 12 dB/octave high pass.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.

Stainless Steel: The mounting hardware is stainless steel to resist corrosion.

M2D4-10IB Subwoofer & Enclosure

Marine Tested: Rockford Fosgate uses industry standard tests (ASTM B117 salt/fog and ASTM G154 UV) to ensure the M2D4-10IB subwoofers are durable in the difficult marine environment.

Impedance Switch: A switch on the input terminal allows you to easily change the subwoofer's impedance between 2O and 8O, internally changing between wiring the dual 4O voice coils in parallel and in series. (The connected amplifier should be off when changing the impedance.) The power handling is the same for either setting; 400 watts RMS/1600 watts peak.

Infinite-Baffle Operation: The M2D4-10IB is optimized for infinite-baffle operation (free air) so it can be installed in a variety of locations, without the need for a dedicated enclosure.

LEDs: There are red, green, and blue LEDs on the back of the bridge over the cone to create a glow on the woofer cone. The LEDs can be powered individually, or in any combination you like. Depending on what combination of LED wires is connected, they light red, green, blue, yellow, pink, aqua, or white. The LEDs can be controlled using the included Rockford Fosgate PMX-RGB LED Controller. An LED power wire harness is included with a 4-pin waterproof Deutsch DT Series connector that plugs into the subwoofer frame.

Speaker Terminals: In addition to standard male quick slide terminals, the subwoofer also has a 2-pin waterproof Deutsch terminal. A speaker wire harness with a 2-pin waterproof Deutsch DT Series connector is not included.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.

Stainless Steel: The mounting hardware is stainless steel to resist corrosion.

RNGR18-FWE Subwoofer Enclosure: The RNGR18-FWE 10" subwoofer enclosure is a roto-molded, composite-blend subwoofer enclosure which is designed to be a direct fit for select Polaris Ranger model ATVs. The enclosure's texture and color is matched to the ATV's interior and is up to 40% lighter than previous generation enclosures. The subwoofer enclosure mounts under the passenger side front seat. A mounting bracket is provided for the enclosure which bolts directly to the factory mounting holes.

PMX-RGB LED Controller

Overview: The Rockford Fosgate PMX-RGB Color Optix controller lets you illuminate and control the included M2-65B and M2D4-10IB Color Optix marine speakers and subwoofers. Featuring a completely encased housing, rubberized wiring, and Element Ready watertight connectors, the PMX-RGB is IPX7 waterproof certified, making it impervious to even the harshest marine environments.

App Control: The PMX-RGB can be controlled from your smartphone using Rockford Fosgate's proprietary RF CONNECT App, available from the Apple App and Google Play stores. After connecting your smartphone wirelessly to the PMX-RGB controller, you'll be able to choose from 30 different color scrolling options or choose a fixed color from the color wheel. Scrolling speed and brightness controls are also available for customizing the lighting.

Plug&Play: The Rockford Fosgate PMX-RGB controller features easy configuration and connection via proprietary Element Ready connectors that provide a secure, watertight seal. It features 8 individual 17" RGB output cables for lighting up to 8 Rockford Fosgate Color Optix marine speakers (maximum 2A total current draw).

Powering: The PMX-RGB controller includes a 17" power and ground harness with inline 2A fuse, and has an operating voltage range of 9-24VDC.

PMX-RGB Specifications:

• RGB Control Outputs: 8
• Maximum Amp Draw (Total): 2A
• Operating Voltage: 9-24VDC
• Waterproof Rating: IPX7
• Control Module Dimensions: W = 2.411", H = 0.913", D = 5.050"
• Overall Length: 38.5"